Tiffany Watch Thoughts and my Streamerica World Time

When I passed by Tiffany at HKIA, I had to go and watch around for their beautiful designed Articles, each of them are represented the best of the samples of the designs, no matter watches Diamonds, chain and Cuff Links…
I had been in love for Tiffany Cuff Links for many years, I had some of the dis-continued Cuff links, and they are just too beautiful to be used.
Watches… They are classic, sleek and neat design, traditional Watch for serious people who loves simple design at most.
When I saw this poster, I think of Christmas, it is the magic of Tiffany, every poster, picture was carefully selected and would give you the best seasonal thought what you should do in this season… Walk into the church with your beloved girl for marriage! hand in hand with snow falling on your head and shoulder. You seem do not feel cold as you are in Love….
I had a Tiffany Watch, it is a World time, and One of my friends saw it and he took it away and put HKD$10,000 on the table… OK! As he is my friend… who has a friend still in contact for after 40 years!??
This is Streamerica! My one is World Time, a Lovely watch… My picture was taken by a Nokia N97 mini Handphone so it is not too sharp at all. This is another I chopped out from the web, it looks much better!!
New York Snob

Rolex Day Date President Ref 1807 Bark Finish Oman Crown

This is an very fine and Rare ROLEX Ref.1807. Made in 1974 for the "Oman Crown" Dial. Case & Bracelet in Mint condition, with London Import marks for 1974.
The present lot has case numbers and RWC LTD., ( the mark of ROLEX U.K. ) stamped in the case back, this was done for at the Request of the British Assay Office in Order to ensure that once a watch was Imported into the U.K., and the Duty paid.
The back could not be swapped to another watch to avoid Import Duty. This watch still retains its Original Rolex sticker on the case back. It is excellent proof that watches left the Rolex Factory with Double References.
HK Snob

James Bond’s Watch

I have seen a lot of People using the Nylon watch strap to carry their Submariner, it is very causal, very stylists and seems a lot of Diver’s look for wearing the Submariner.
Interesting to find out that my movie Idol Sean Connery has been using this in 1961 in his James Bond films “Gold Finger and Thunder Ball” For years, watch enthusiasts have been using the “Bond NATO” nylon straps that bear very little resemblance to the strap used in the film. After the new Blue Ray and HD televisions, we ultimately realize that the real pattern used in the Watch Strap worn by Commander Bond is made by the Corvus Watch Company that offers the Real Bond Nato Watchband….However the Strap was 3 mm too narrow on Sean Connery’s Subamriner.
To make the REAL BOND NATO watchband, Corvus turned to Phoenix Straps in Wales, UK. Phoenix was the original supplier of nylon straps to the British Ministry of Defense. Thousands of British Army soldiers have worn watchbands made by Phoenix, the last watch strap manufacturer in the UK. Their webbing is made by a small mill in Scotland using vintage machinery, giving Corvus strap a unique feel, far superior to those created in other low cost manufacturing sites using high-speed looms.
In recent years, many of manufacturers around the world have made imitations of the original NATO “G10” military issue watchband. Sometimes these knockoffs are very cheap, I have seen that strap is about HKD$40.00 (US$5.00) in Sham Shui Po. And Canton Road North, but they are never better in quality.
If you want to use something original , something, Tough and durable, and Stylist, go for the Real Bond design with right colour and pattern
Do not spoil the image of James Bond, and the great Watch made by Rolex by put your USD$7,000 dollar watch on a Cheapo fake strap of USD$5.00!
Use a genuine Phoenix REAL BOND NATO strap, woven and assembled in the United Kingdom.
HK Snob

The Most Beautiful Daytona?

This is the Rolex Daytona that has the perfect match colour of Gold and Black. Solid Gold case with Black Dial and Black Bezel, The ratio of Black and Gold is approximtely 50/50. That has a very unchanting charms, seems like the Yi and Yang of Taoist philospphy, an unison harmony!
It is not the most expensive Daytona, but Definitely the most beautiful Daytona!
HK Snob

Women and their watches

From Top to bottom

Elle Macpherson

Bar Refaeli
Brookyln Decker

Elle Macpherson

January Jones

Elle Macpherson

They all wear Rolex Daytona! But i do doubt who has looked at their watch?

HK Snob

What Watches Victoria and David Beckham wear?

David Beckham of the Los Angeles Galaxy arrives at the Ninoy Aquino International Airport Terminal 3 on 1st Dec for an exhibition game against the Philippine Azkals at the Rizal Memorial Stadium in Manila on Dec , 3 2011. He worn a Rolex 18KT Yellow Gold Daytona!
How About Victoria? Guess what!? yes, Rolex Daytona!
Manila Snob

Rolex Daytona

The World most famous iconic Rolex Daytona was unleashed to the world in the early 1960′s and has become an object of affection many watch aficionado.
The watch became known as the Daytona, named for Daytona Beach in Florida which was home to some of the biggest names in auto racing. The watches were popular in the racing community because of their usefulness in calculating average lap speed.
Early Movement was from Zenith El Primero, later on 2002, Rolex developed his own Movement 4130.
Although Rolex continues to manufacture a version of the “Daytona”, the rarest versions of the Rolex Daytona are the first versions, those whose reference number contains four digits, for example the 6238, 6239, 6240, 6241, 6262, 6263 6264 and 6265 References, produced from 1961 to 1987. Early models were available in dial configurations that were black with white registers or cream with black registers. They were dubbed the Paul Newman models and are in high demand even today! The most expensive one is Cosmogrpah so call “Red Daytona” Ref 6265, very few samples were made in 1980. It was sold in auction with USD$170,600.00. Famous F1 Driver Sir Jackie Stewart sued wear Daytona. How about you!?

HK Snob

Rolex probably has the Lowest TCO

Fake RolexYou can find fake designer and luxury products just about anywhere these days, and most people consider owning one a harmless transgression. After all, if you were never going to pay HKD$80,000 for a real Rolex, who is really hurt if you wear a fake that cost you HKD$350? Rolex didn’t really lose a sale, right? It turns out that the victim of the “crime” may be none other than you!
ResearchAn Interesting research project has demonstrated that the act of wearing a fake designer item actually causes an individual to behave in a more unethical and cynical manner. The study was started by giving a group of young female subjects expensive Chloé sunglasses to wear. These glasses were actually all authentic products, but half of the subjects were told that they were wearing a fake.

Fake Watch and Dishonest manner
In subsequent testing the subjects wearing the “fake” sunglasses were more than twice as likely to cheat on a math test (71% vs 26%) when they thought their cheating would not be detected. Another test showed that the subjects wearing “fake” sunglasses judged other people as more likely to behave in a dishonest manner.
It isn’t uncommon to see a lot of Fake Rolexes in HK. Are People wearing Fake product will likely been suspected that they have tendency to cheat! There is report saying that wearing Fakes makes one feel like a phony.

Why Fake
So why do people wear Fake Rolex, Louis Vitton, Gucci, Hermes?! I have some assumptions, young kids like to show to his class of friend he is able to use expensive luxury products. That is the fact HK judges people by their appearance! Someone said the Luxury goods would bring them with confidence, true!?
No, As still many people in HK do not like Rolex, they have two groups of people, one who can not afford to buy one and they probably never can, so they do not like this kind of Products,
Another one is who is too rich and probably they would not like to use anything at all as they are not extravaganza to them.
Watch, they drop Rolex, go for Patek Philippe
Car, they drop Porsche, go for Ferrari
Pen, they drop Montblanc, they go for Namiki…
Some watch collectors do not collect Rolex as they said that Rolex is too basic for them, , their preference is Something else. I had friend that obvious he announce he hates Rolex!! He is an Anti_Rolex_Actvist! Anyway, he is one of the minority only.
My comment
A watch got to be very dependable, accurate, trouble free, rugged, comfortable to wear,
Has a Swiss tradition, has successful story behind, affordable and reasonable pricing.
My preference is still solid gold watch like Day Date, as it is cheap to own cheap to use,
And never prone to have problem…

TCO
TCO means “Total Cost of Ownership”
A term to defends semiconductor equipment value.
TCO (total cost of ownership) is a type of calculation designed to help consumers and enterprise managers assess both direct and indirect costs and benefits related to the purchase of any IT component or semiconductor manufacturer equipment. The intention is to arrive at a final figure that will reflect the effective cost of purchase, all things considered Such as:
Cost of the instrument- Lowest price for a Solid gold watch
Output of the equipment- Rolex Never let you down
MTBA (Mean time between assistance) longer the better, Rolex seldom fail
MTTR (mean time to Repair) shorter the better, Two Weeks Maximum to repair in Rolex Service Centre HK for normal Failure… Some other Swiss Brand took me 5 Month to overhaul a watch!!
Repair Cost- Rolex seems is very reasonable. Normal Repair is approx. HKD$1500, Some of the Swiss Watch (Not Rolex) can ask for HKD$50,000 for a overhaul, no damages at all.
Down Time, Lower better, for watch, should be “Zero”
Rolex has a super high value even using for many years, it does not lose face when you wear your grand-pa’ Milgauss or Daytona. Will You!, if yes, give them to me!
Rolex is All Season, All Weather, all occasions partner for you!
Rolex is beautiful…

Conclusion
As a Conclusion, In my humble opinion, Rolex has the Lowest Total Cost of Ownership (TCO).

PSI do not have any connection with Rolex Watch Company, agent and or Rolex AD, I just express my personal comment on Rolex!
HK Snob

The Underestimated Rolex Turn-O-Graph

Initially, the Rolex Turn-O-Graph was launched in 1953 as an adventure watch. Although it was discontinued in the early 1960s due to the success of the Submariner and GMT as sport watches that overshadowed this model, Turn-O-Graph is a fantastic vintage model especially those few before 1960 worth collecting. Today, a similar model still manufactured is the new Oyster Perpetual Datejust Turn-O-Graph Ref 116264.
History
The Rolex Turn-O-Graph reference 6202 was first produced in 1953. Basic design objective of Turn-O-Graph was to add a feature concept of timing by means of the rotatable bezel is described as “a reminder of times past, for phone calls, conferences, timing parking and countless other usages” In fact, this was the advertising campaigns in a Rolex catalogue of the time present the 6202 on the wrist of an airline passenger.
Turn-O-Graph Chronometer
Only very few models are certified chronometers. From the second half of the 1950s the Pencil hands were replaced by the more modern Mercedes hands and the A296 was replaced by the new A260 calibre. On the first models the word Turn-O-Graph is at the 12 o’ clock position with obvious spacing between the words Oyster and Perpetual, whilst on the following models the name is at the 6 o’ clock position and the distance between Oyster and Perpetual is of the standard size. The Turn-O-Graph is available only in steel whilst the dial is glossy or honeycomb finished, with gold writing in both cases
Turn-O-Graph 1954-1960
The production of the line ended at the beginning of the 1960s, after the trial and error to test the market acceptance, without being replaced, making way for the more successful and rich Rolex Datejust Turn-O-Graph series, of which the first model was the 6309. This 1954 model is characterized by a rotatable graduated in a similar way to the rare Turn-O-Graph 6202 De Luxe model and is made only in gold (14kt and 18kt, yellow or rose) or in steel / gold.
In 1956 the 6309 was substituted by the reference 6609 with the new 1065 Calibre which was characterized by both a flatter case-back with concentric circle polishing and a pie-pan dial lacking fixing pins. The hour markers and hands have a characteristically 1950s design and the date numbers alternate between red and black.
The Turn-O-Graph is made in a rare De Luxe version as well, with a honeycomb dial, appliqué hour markers, rotatable bezel and gold crown. Even some Datejust models, nicknamed Turn-O-Graph, have this particular bezel. .
Thunderbird
The 6309 is known as the Thunderbird as well, from the name of the acrobatic squadron of the US Air Force which took this watch on as their official timepiece.
The Earliest Version of Rolex Turn-O-Graph
Since it was marketed as an adventure watch, it was equipped with a water resistant to a depth rating to 165 feet. If you are lucky enough, you may come across this model with 165 feet engraved on it. This is because very few versions of this model actually bore it, and such a watch has become collectible.
Latest Turn-O-graph
The most sought-after references for this model are: Rolex Turn-O-Graph Ref. 16264-116264. Classic watch collection. The best Seller is Black Dial, white Dial and Then blue, they are all same price if the other options remain unchahged.
Collector’s Item
When More Red Colour on Dial, the Hotter the sought-after Model on all Rolex
The Ferrari Red Dial Cosmograph Daytona Ref 6265 made in 1980s hit a record of US$170,600 and Ferrari Red Dial Rolex Ref 1803 Day Date would trigger an Auction price of US$40,000.
Now you can buy a Rolex Watch that has A Glittering Red Second Pointer, a Red description words of “Turn-O-Graph” and a Red Date Display.
After Daytona and YachtMaster, Turn-O-Graph is using solid Steel as for the Strap. Water Resistant to 50M. a New Dress Watch with Three Red, Red “Turn-O-Graph” Red “pointer” and Daring Red “Date”
If you had already a Standard Date Just, a Day Date, a Sub, and GMT… probably you may add this time in your Collection: Turn-O-Graph.
HK Snob

What's the difference between acrylic, mineral, and sapphire crystals?

The see through window above the dial is commonly interpreted as Crystal.

An acrylic watch crystal is a kind of plastic, being ductile, which has the advantage of being resistant to shattering, but prone to be scratched quite easily. Fortunately, scratches can be easily removed from acrylic. See Note*1 below for rework.
Mineral crystal is a kind of glass, which is more scratch resistant than acrylic, but not as as good as sapphire. Mineral crystals are also somewhat better at shatter resistance compared with sapphire. Unlike acrylic, scratches in mineral glass are more difficult to buff out; and unlike sapphire, mineral glass will scratch. In my opinion, the mineral crystal seems to be a poor compromise between the two extremes.
A sapphire crystal is indeed made of synthetic sapphire industrially, which is a transparent form of corundum, or aluminum oxide (Al2O3). It is extremely hard (Moh's scale 9), theoretically it will resist scratching by most substances short of diamonds. However, if it is struck sharply from the right direction, sapphire will crack. Despite the relatively large size compared with sapphire gemstones, sapphire crystals aren't very expensive (approx. $20). However some of the curved synthetic sapphire can be a few time more expensive as due to the manufacturability.
A cheap Fake watch usually used Mineral Crystal which is not as clear and transparent as the Synthetic sapphire. This is one of the way the tell this is Grade B or Grade A Fake Watch. Some grade A Fake watch uses synthetic Sapphire!
Attached Picture is a Older Rolex Day Date Ref. 1803 dated 1972 which was only having
Acrylic Crystal, where the newer Day Date Ref 18338 dated 2003 on the right is using Synthetic Sapphire.
Rolex Acrylic Crystal is just HKD$250 and a Synthetic Sapphire is approximately HKD$900.
A Rolex Acrylic Crystal is warmer and the new synthetic Sapphire is cooler when you place you watch to you cheek.. some of the people prefer the older watch just because they warm they are warmer….more closer to the skin temperature!
Note*1
How do I remove the scratches from an acrylic crystal?
Good old-fashioned toothpaste is a good start. Start by buffing a little bit onto a clean fine cloth over the area of the scratch. Rub lightly, and rinse with a very slightly damp cloth. Repeat until scratches are gone.
Note that there are also purpose-made polishes for this purpose, such as Polywatch , Crystal-Kleer or Brasso. Tsim Sha Tsui Snob

Orient Manual Calendar Automatic Watch

This is a large size 40mm Calendar Automatic watch, 100m Water Resistant, made by Orient Watch Co. Japan.
The Display here on the picture is 2011 Nov 27 Sunday… Well, of course this is not perpetual calendar. What Can you expect with HKD$1280!? I bought it at Dundas Street when I Passed by this undistinguished watch shop. Let me check the accuracy of it.
Dundas Street Snob

What is The best Collectible Rolex We should Buy Today?

You want to tell about which current model Rolex is the most collectable? And which model is the best selling from each brand? First, best-selling and collectable almost rule each other out. The truly collectable Rolex watches that fetch the highest prices are those that were produced in a very small series or even had a manufacturing default. So Does it mean a Platimum Rolex Date Day is the best Collectible. I don't think so.
A Collectible watch may contain or fulfill this factors:
Always having a Good Movement
A Good technologic Achievement
A Memorial item
A limited number of production A Must
A Hit watch at certain time later, retro Style
Not necessary Beautiful.
A Good Brand Value, Always important factor.
A Rolex Date Day is A Beautiful good Technological Achievement as it is Flag ship of Rolex
But does not mean it is Collectible as generally they are made in Volume production.
It's similar to stamps. The run of the mill stamps are worth nothing. The odd misprint can be worth millions because they are so rare.
Rolex is an ideal case for that because they produce industrially. Thus in principle you don't get collectability from Rolex watches. However, certain versions stand out and are indeed super desirable (Black Explorer, Vanilla Sub, Comex Sub , Paul Newman Daytona, McQueen Explorer II, Ferrari Red Dial). Rolex are industrial but some rare one off watches will fetch up to HKD$1,000,000. The opposite are super rare Patek Philippe 1953 World Time Enamel watches. There are only 3 per pieces. The highest price was around $4 million. This proves that rarity and technical complexity as well as aura are the driving factors in collectability and value.
Thus it is for watches. New collectors should do their own research and they should march to the beat of their own drummer when it comes to collecting watches, but there are still some general trends, histories and situations that influence the long term values of many watch brands and many models of movements.
So what is the Best Collectible Rolex that we should Buy today!?
Rolex Submariner Ref. 116610LV Green bezel green dial
Rolex Explorer II Ref 216570 Orange pointer Black Dial

This is My Suggestion only!
HK Snob

What is the best Selling Model for Rolex In HK?

The Most recognizable Rolex Model is no question the Fluted Bezel Date Just or the Day Date. As the Fluted Bezel stands out amongst the rest of the watch as an Icon of Rolex.
Rolex never published their sales figure on models, base on my understanding, it is estimated that 60% of Rolex watches sold are some versions of the Date Just.
Best Sportive model is Submariner, but it comes with one size, where Date Just comes with 3 sizes Men, Boy (mid) and lady, till 2009 that they introduced the Ref. 116334 Rolex Date Just for men 41mm size. So there are 4 sizes for Date Just, plus a few variants for different strap available, and the material for watch stainless steel, two tones, and Rose gold Two Tone. This creates a lot of variants for different people who does like his style and models. This Successful Strategy makes Rolex Date Just the Most Successful Model.
A Rough estimation this is the best Selling Model in HK
1. Men Stainless Steel Date Just Ref. 116234
2. Men Two Tone stainless Steel and Yellow Gold Date Just Ref. 116233
3. Men Two Tone stainless Steel and Rose Gold Date Just Ref. 116231 mainly because of the Chinese. The Date Just occupies approximately 50% of total Rolex Sales in HK.
The Submariner is very popular for professional divers, youth and sportive woman, celebrity and movie star. Since it has only one size, due to the effect of the Divers, Professionals, executives and Celebrities, Movies Star, the Sales is keep up with the Date Just, but due to one model only, their sales is approximately 6% of Total Rolex Sales units. The Third best Selling model is Explorer II.
So How About Date Day, as you know, Date Day is the flag Ship of All Rolex, only Gold is available, that has been marked as the Icon of the Big Brother’s watch, Presidents watch, CEO, CTO best favourite watch, as no one can afford if you are not the manager’s in the company, and in fact this gives Date Day a image of Older men’s watch. Yes, I seldom seeing men wears a Date Day if he is younger than 40’s.., So Date Day becomes a Status of Watch in your career.
HK Snob

The Rolex Hot item at Singapore Chang Yi AirPort Rolex Shop

Chang Yi Airport Rolex shop has the rare item that HK People is looking for such as The Rolex Explorer II orange Hand white Dial, they are selling at SGD$12,000.00. Price has been deduced the GST 7% already, where as the list price is supposed to be SGD$10300. They have no stock for Black dial which I think is Better than White as the Orange Hands inner portion is black, so the yellow arrow hands looks apparently to be “ floating arrow"!! When I look at it, I feel that it is large, but a bit large than it is needed. I think it is not as attractive as I was thinking of. So I thin I will switch from Black Dial, which I have to see and start to tell how does it looks. May be it is not as beautiful as I am thinking. Anyway, I did not buy the white dial Explorer II Orange hand!
Other rare item is Submariner , they have limited supply of it. There also they have Milgauss orange hand white dial. So why should Singaporean come to HK for shopping for the Rolex!?

Singapore Snob

What are the materials used to make watch cases?

There are many types of metal to be used for making watch cases, Solid Yellow Gold, Pink Gold, White gold in gold like 9K, 14K and 18K, nowadays, gold case is almost 18K (75%)
Stainless steel is used to be the most common material for case. The High end watch is often made of Platinum or Titanium.
Platinum is a very heavy metal, and gives a shiny white metallic appearance. Unlike gold, pure platinum is fairly hard and resistant to scratches (similar to hard stainless steel). For this reason, it is often used in 95% purity (i.e. Pt 950). However, raw platinum is expensive to be used, not only because of its rarity, it is tough and the tooling has to be changed for not more than 3 cases, so manufacturing cost of high. But also because it is used in higher purities and requires more effort to work into a final shape. So as traditional practice in marking prices of watch, Platinum is used to be the Most expensive line of the Watch, then Pink gold, White Gold, yellow gold.
Take Rolex watch Price as for examples, make it a stainless steel as 1. the Two one is about 1.7X Yellow gold is 4X, Rose Gold is 5X, Platinum is 7X.
Other case materials which one will run across occasionally (especially on the vintage market) are Sterling Silver (92.5% purity silver), Coin silver (80% purity silver), nickel silver or silveroid (not silver, but 66% copper, 24% zinc, and 10% nickel), nickel, and nickel plated steel. Also, more recently, one can even find watch cases made of ceramic (zirconium oxide, Rado has been using for many years as used recently by IWC) and aluminum (used in conjunction with other metals, as currently used by Porsche Design and BVLGARI.)
Titanium is a relatively light-weight metal, with a hardness exceeding that of most steels. It also has a poor heat conductivity character, which means that it won't carry heat away from your skin as quickly as steel or aluminum (i.e. it will feel warmer to the touch - sometimes you'll see claims that titanium "remains at skin temperature" - this is technically incorrect, any more than a small piece of wood stays at skin temperature). Several varieties of titanium are available. Titanium has some interesting mechanical properties: it can "rip" when cut so it is difficult to machine, and two pieces of titanium pressed together can "weld" themselves together.
This latter property is why it is important that watches with titanium cases and backs have the casebacks removed periodically - the threads can actually rip out of the case if left undisturbed too long.
Later trend like AP introduces the carbon Fibre that has to be molded under hi temperature and pressure.
Rado has been using unscratchable ceramic material to make watch for many years..
Plastic watch case has vibrant colour that has no limit at all, but the sweat that goes into the plastic will ultimately changes colour of the plastic, the plastic will become brittle after years. It may crack. So only cheap watch use plastic to make cases.
So what is the best material to make watch cases, my opinion is Platinum as it is precious metal that has a dull silver grey colour. Rose gold because of the colour is beautiful and classical look. White gold as it is like stainless steel, good low profile metal for cases, yellow gold that shines the way forever when you wear it on your write. Titanium is good for sport watch as it seem has it unique colour and super light weight yet strong to resist scratches, Ceramic is not a good material a sit is too cold on my hand. Plastic is limited to be used for low cost watch I believe, though there has been a trend for expensive watch case to have some plastic parts on the watch cases Like AP. But I don't like it at all.
Attached picture is a Rolex Oyster watch case made of solid single piece of 18KT Yellow Gold.

HK Snob

What is a watch winder, and do I need one?

Collectors who have more than one automatic watch may have "difficulty" keeping any one watch going continuously. This leads to increased inconvenience especially if perpetual calendars and moonphases must be reset. A solution has been invented - the automatic watch winder.
The idea is quite simple, to strap the automatic watch on to s socket which is mounted on top of a geared motor, which then moves the watch enough to keep it wound when not worn on the wrist. That way, one can choose to wear any watch at any time, and not have to reset the time or calendars. In theory, this device should be simple and cheap.

In practice, it's not as easy as it sounds. First, while an automatic watch has an overwind protection mechanism to avoid damage to the movement, if the overwind mechanism is constantly used for hours at a time (i.e. though constant turning, rather than the unpredictable movement of the human wrist), the lubrication of the mechanism is worn out faster. This means that watch winders must be designed to only make so many turns per day, and to let the watch sit and run itself through its power train. Furthermore, since automatic winding mechanisms vary from watch model to model, the winder must be designed to have an adjustable number and direction of turns per day. Finally, mechanical watches are considered luxury items, which means watch winders are doubly so - due to the small number of people who would actually want one.

An important factors for Watch winder is the magnetic flux leakage. It should not have significant leakage that would magnetize your Expensive Watch. Battery driven motor is preferred as it is quiet and less electrical interference. Two size A battery cells can run continuous for two years. Some of the cheapest one of watch winder is HKD$800 and more expensive Watch Winder is sold at HKD$1,000,000.00.

A Mechanical watch is prone to get easier for wear and tear if they are set to run on timer for more than one year. If I had too many watches I had rather manual set the time before I wear it, only concern is Perpetual calendar that is hard to set-up. I know many people even does not care the day and date on their calendar perpetually at all,

All of this means that manufacturers for the consumer market must not only make their winders mechanically foolproof to avoid damaging watches, but they often construct the winder comparably to a jewelry box. The upshot of all this is that most consumer’s watch winders with programmable winding are expensive - often costing several hundred or thousand dollars.

While cheaper professional models exist, these often do not come with programmable settings, as the maker assumes that they would be used in a watchmaker's shop.

Some Cheap Watch winder has a lousy watch capture and lock device, you expensive watch may drop out and get scratched when you are travelling.

Last word - winders are not a necessity, they are a convenience. You should decide whether they are worth it based on whether you feel inconvenienced resetting your automatics occasionally.
HK Snob